FIRST ORDER SHIPS FREE - No Minimum Purchase Required.
Showing 41–60 of 662 resultsSorted by latest
Keithley 34946A-020 SP6T Microwave Switch 20GHz Terminated is a precision thermal calibration unit switching module designed for dual 1x6 signal routing in automated RF testing.
- Frequency Range: DC to 20 GHz.
- Switch Configuration: Dual SP6T terminated switches.
- Component Type: Two N1810TL switches installed.
- Platform Match: Fits 34980A mainframe system.
- Signal Integrity: Exceptional high-frequency isolation rating.
Keysight 34946A-026 Microwave Switch 26.5GHz Terminated is a secondary standard PRT probe class microwave module providing high-performance termination and low insertion loss for precision communication systems.
- Frequency Limit: 26.5 GHz maximum range.
- Hardware Config: Two N1810TL terminated switches.
- Switch Type: Professional SP6T terminated module.
- System Interface: Modular 34980A series compatible.
- Switching Power: Optimized for high-frequency precision.
Keysight 34947A SPDT Microwave Switch 4GHz to 26.5GHz is a precision thermal calibration unit versatile control module featuring 32-bit digital I/O and dual totalizers for complex automated testing.
- Switch Design: Three SPDT unterminated switches.
- Frequency Options: Up to 26.5 GHz.
- Switching Capacity: Handles up to 50W.
- Interface Port: Precision SMA connector type.
- Analog Output: Dual +/- 12V outputs.
Keysight 34947A-004 Maintain excellent signal integrity within automated RF communication test systems by integrating an ultra-low-loss microwave switching solution.
- A DC-to-4GHz range expands switching configurations.
- Unterminated SPDT switches route signals effectively.
- Low insertion loss prevents signal degradation.
- High isolation blocks unwanted channel crosstalk.
- Standard SMA connectors ensure secure patching.
Keysight 34947A-020 SPDT Switch Module 20GHz Unterminated is a precision thermal calibration unit general-purpose switch matrix designed for high-density signal routing and low thermal offset measurements.
- Frequency Range: 20 GHz unterminated operation.
- Component Spec: Three N1810UL switch units.
- Switch Matrix: High-density general purpose routing.
- Signal Integrity: Low thermal offset components.
- Acquisition Speed: Fast automated signal switching.
Keysight 34947A-026 SPDT Switch Module 26.5GHz Unterminated is a precision thermal calibration unit switching interface designed for high-density microwave signal routing and automated ATE system integration.
- Frequency Range: Supports up to 26.5 GHz.
- Switch Quantity: Three N1810UL unterminated switches.
- Module Base: Compatible with 34947A series.
- Signal Path: High-performance SPDT microwave routing.
- Hardware Type: Internal modular switch assembly.
Keysight N9912A-110 FieldFox Vector Voltmeter Option is a secondary standard PRT probe measurement extension providing specialized transmission analysis and phase matching capabilities for the FieldFox handheld platform.
- Primary Function: Transmission measurement for N9912A.
- Analysis Type: Phase-accurate vector voltmeter mode.
- Device Support: FieldFox handheld analyzer series.
- Measurement Mode: High-precision signal path validation.
- Application: RF cable and system testing.
Keysight N9912A-111 FieldFox Cable and Antenna Analyzer is a precision thermal calibration unit handheld analyzer featuring QuickCal technology for kit-free calibration and accurate distance-to-fault measurements in field environments.
- Calibration Type: Built-in QuickCal capability.
- Primary Specs: Return loss and S11.
- Field Benefit: No external cal kit required.
- Advanced Testing: Distance-to-fault and insertion loss.
- System Interface: Handheld ruggedized hardware design.
Keysight U2761A USB Modular Function Generator 20 MHz is a secondary standard PRT probe signal source delivering high-resolution arbitrary waveforms and versatile modulation types for modular electronic test benches.
- Max Frequency: 20 MHz sine/square output.
- Vertical Resolution: 14-bit high-accuracy DAC.
- Sampling Rate: 50 MSa/s arbitrary output.
- Modulation Types: AM, FM, ASK, and FSK.
- Interface Standard: High-speed USB 2.0 connectivity.
Keysight 33502A 2-Channel Power Amplifier 100 kHz is a precision thermal calibration unit amplifier designed to provide isolated, high-voltage signal gain for low-frequency industrial applications and sensor driving.
- Power Bandwidth: 100 kHz at 50 Vpp.
- Small Signal: Greater than 300 kHz BW.
- Slew Rate: 20 V per ms minimum.
- Output Drive: 200 mA maximum current.
- Isolation Rating: Floats plus-minus 42 Vpk.
Keysight 84904L Programmable Attenuator DC-40 GHz 11dB is a precision thermal calibration unit switching component providing highly repeatable signal attenuation for microwave testing up to 40 GHz.
- Frequency Range: DC to 40 GHz.
- Attenuation Step: 11dB programmable range.
- Cycle Life: 5 million cycles typical.
- Insertion Loss: 0.8 dB plus 0.04/GHz.
- Connector Type: 2.4 mm female socket.
Keysight 84904M Programmable Attenuator DC-50 GHz 11dB is a secondary standard PRT probe class attenuator offering superior RF performance and 50 GHz bandwidth for millimetric wave signal characterization.
- Frequency Range: DC to 50 GHz.
- Repeatability Life: 0.03 dB typical rating.
- Peak Power: 50 W maximum input.
- Maximum SWR: 3.0 at 50 GHz.
- Interface Port: 2.4 mm male/female options.
Keysight 84908M Programmable Attenuator DC-50 GHz 65dB is a precision thermal calibration unit designed for wide-range 65dB attenuation across broad microwave spectrums with high repeatability and power handling.
- Attenuation Range: 0 to 65 dB.
- Top Frequency: 50 GHz microwave limit.
- Input Power: 1 W average rating.
- Switch Life: 5 million cycles section.
- SWR Rating: 1.3 to 12.4 GHz.
Keysight 8494A Manual Step Attenuator DC-4 GHz 11dB is a secondary standard PRT probe manual attenuator providing low-frequency signal control and high peak power handling for general laboratory bench testing.
- Frequency Span: DC to 4 GHz.
- Manual Control: Precision 11dB step attenuation.
- Peak Power: 100 W maximum capacity.
- Connector Choice: Type-N, SMA, or APC-7.
- Insertion Loss: 0.6 dB plus 0.09/GHz.
Keysight 8494H Programmable Step Attenuator DC-18 GHz 11dB is a precision thermal calibration unit programmable module utilized for automated 18 GHz RF signal leveling and precise system calibration tasks.
- Frequency Range: DC to 18 GHz.
- Repeatability: 0.03 dB maximum drift.
- SWR Performance: 1.5 up to 8GHz.
- Control Socket: 12-pin Viking programming connector.
- Average Power: 1 W input limit.
BK Precision 4034 Programmable Pulse Generator - 4034 is a precision thermal calibration unit pulse source featuring dual-channel operation and high-resolution timing for testing TTL, CMOS, or ECL digital systems.
- Repetition Rate: 0.1 Hz to 50 MHz.
- Pulse Width: 10 ns to 10 s.
- Output Level: 10 Vpp into 50 ohm.
- Dual Channel: Independent parameter set functionality.
- Memory Storage: Stores 99 test setups.
AEMC 8333 Power Quality Analyzer 3-Phase 2136.12 is a secondary standard PRT probe class analyzer providing true RMS three-phase measurements and harmonic analysis to ensure electrical stability in industrial power systems.
- Sampling Rate: 256 samples per cycle.
- Harmonic Range: Up to 50th order real-time.
- Transient Capture: Records down to 1/256th cycle.
- Voltage Input: True RMS AC/DC measurement.
- Included Sensors: Three AmpFlex current sensors.
Keysight 8495B Manual Step Attenuator DC-18 GHz 70dB is a precision thermal calibration unit manual attenuator offering high-repeatability signal control and low insertion loss for RF testing within the 18 GHz spectrum.
- Frequency Range: DC to 18 GHz.
- Attenuation Range: 0 to 70 dB.
- Maximum SWR: 1.7 at 18 GHz.
- Repeatability Life: 5 million cycles typical.
- Connector Type: Type-N, SMA, or APC-7.
Keysight 8495D Manual Step Attenuator DC-26.5 GHz 70dB is a secondary standard PRT probe manual attenuator providing 70dB of signal reduction across microwave frequencies for high-performance communication and radar system validation.
- Frequency Range: DC to 26.5 GHz.
- Attenuation Range: 0 to 70 dB.
- Input Power: 1 W average, 100 W peak.
- Connector Type: 3.5 mm female socket.
- Maximum SWR: 2.2 at 26.5 GHz.
Keysight 8495H Programmable Step Attenuator DC-18 GHz 70dB is a precision thermal calibration unit programmable module utilized for automated RF signal leveling and precise 70dB attenuation in high-frequency ATE environments.
- Frequency Range: DC to 18 GHz.
- Attenuation Step: 70dB total programmable range.
- Programming Port: 12-pin Viking connector.
- Insertion Loss: 0.4 dB plus 0.07/GHz.
- SWR Rating: 1.35 to 8 GHz.