FIRST ORDER SHIPS FREE - No Minimum Purchase Required.
Advanced Dimensional Measuring Tools
Professional Dimensional Measuring Tools provide essential diagnostic data to ensure the mechanical integrity of precision-engineered components through high-resolution linear and angular monitoring. These specialized instruments deliver critical insights into geometric tolerances and surface consistency, supporting strict compliance with NIST traceability and ISO/IEC 17025 standards for rigorous aerospace and medical device manufacturing.
Engineered for laboratory and high-volume production environments, our selection of calipers, micrometers, and indicators address the complexity of modern industrial metrology. These professional-grade solutions provide a definitive Calibration Drift and Measurement Uncertainty Correction strategy, identifying microscopic dimensional variances long before tolerance stack-ups trigger a catastrophic assembly failure or a costly production-wide rejection.
- High resolution digital and mechanical metrology
- Integrated SPC data output for quality audits
- Hardened wear resistant measuring surfaces
- NIST traceable accuracy for legal compliance
- Rugged ergonomic designs for shop floor use
Showing 1–20 of 318 resultsSorted by latest
Starrett 675GMJ Optimize workshop depth testing configurations and eliminate indicator setup movement loops with this rigid, vibration-resistant horizontal arm positioning mechanical assembly.
- Includes 25-181J metric indicator tools.
- Provides 6.3mm fine adjustment ranges.
- Features full 360-degree layout adjustability.
- Utilizes 19 x 250mm holding rods.
- Secures stable setups via independent locks.
Starrett 776-7 Electronic Cartridge Probe - 68819 serves as a secondary standard PRT probe reference for high-tolerance linear gauging, utilizing half-bridge construction and a stainless steel body to replace standard AGD dial indicators seamlessly.
- Expert Accuracy: Half-bridge precision electronics.
- Measurement Range: +/- 0.020 inch span.
- Body Material: Rugged stainless steel housing.
- Mounting Size: Standard 0.375 inch diameter.
- Contact Point: Durable tungsten carbide ball.
Mitutoyo 468-270 0.75-1" Digital Holtest integrates into quality control loops as a precision thermal calibration unit for bore metrology, featuring TiN-coated contact points and a ratchet stop for constant-force internal measurements.
- Expert Accuracy: TiN-coated measuring contact points.
- Measurement Range: 0.75 to 1 inch.
- Output Type: Digital data output port.
- Safety Feature: Integrated error alarm system.
- Design: Ratchet stop for repeatability.
Mitutoyo 468-271 Optimize repetitive machining validation and internal diameter inspections on factory assembly lines with this responsive three-point digital internal micrometer sensing package.
- Measures 1.0" to 1.25" bores.
- Maintains uniform pressure via ratchet stops.
- Features wear-resistant titanium nitride coated contacts.
- Provides direct telemetry offloads via SPC ports.
- Triggers integrated overspeed and low battery alarms.
Starrett 84AZ-111-6J Diagnose internal barrel taper errors and automotive cylinder ovality anomalies instantly with this high-sensitivity, self-centering analog checking tool.
- Measures 5.0" to 8.125" diameters.
- Provides fine 0.0001" graduation dial spacing.
- Utilizes dual centralizing plungers for automatic centering.
- Features 2-point hardened tool steel contacts.
- Reveals severe out-of-round internal bore irregularities.
Mitutoyo 368-876 Achieve precise blind bore measurements and repeatable bottom-of-hole internal diagnostics with this high-stability mechanical three-point internal micrometer asset.
- Tracks 75mm to 88mm diameters.
- Employs independent 3-point alloy steel contacts.
- Maintains structural measuring pressure via integrated ratchet stops.
- Supports deep hole checks via optional extension rods.
- Arrives inside secure fitted protective plastic cases.
Mitutoyo 368-995 0.5-0.8" Holtest Mic Set acts as a secondary standard PRT probe reference for small-bore metrology, providing a three-point alloy contact system for precise, centered internal measurements in confined spaces.
- Expert Accuracy: High-precision alloy steel contacts.
- Measurement Range: 0.5 to 0.8 inches.
- Standard Reference: 0.65 inch diameter ring.
- Flexibility: Includes extension rod for depth.
- Content: Two individual range probes.
Starrett 82AZ Achieve surgical micro-bore tracking precision and eliminate deviation analysis latency inside aerospace laboratories with this highly responsive comparative dial kit.
- Spans 0.107" to 0.266" diameters.
- Delivers accurate 0.0001-inch mechanical indicator graduations.
- Includes dedicated actuating rods per probe tip.
- Requires master setting blocks for system calibration.
- Supplied complete with adjusting wrench hardware tools.
Mitutoyo 568-464 Optimize bottom-of-bore internal inspections and eliminate data lag during high-speed machining tasks using this advanced rotatable digital internal micrometer package.
- Spans 40mm to 50mm bore widths.
- Features 330-degree rotatable high-contrast LCD screens.
- Utilizes ABSOLUTE linear encoder error avoidance logic.
- Integrates Titanium Nitride coated 3-point contact faces.
- Triggers built-in automated GO/NO-GO judgment thresholds.
Mitutoyo 568-365 5-6mm TiN-Coated Digital Holtest functions as a secondary standard PRT probe companion for micro-bore analysis, featuring 8.5mm large LCD digits and impact-resistant titanium-coated contacts for precise, error-free internal diameter readings.
- Expert Accuracy: Eliminates over-speed sensing errors.
- Measurement Range: 5 to 6 millimeters.
- Display Type: 330-degree rotatable LCD unit.
- Protection Spec: TiN-coated impact resistant points.
- Included Gear: Fitted protective wooden case.
Starrett 84MAZ-161-7J Streamline maritime engine block verification and heavy industrial cylinder diagnostics using this large-bore mechanical analog internal checking tool system asset.
- Tracks 203.2mm to 308mm diameters.
- Delivers accurate 0.002mm mechanical graduations.
- Isolates bore taper and out-of-round variations.
- Requires master referencing rings for system calibration.
- Features highly durable hardened steel tracking heads.
Starrett 84AZ-134-7J Manage large-diameter pump housing inspections and industrial piping system audits safely using this ruggedized wide-range analog differential sensor package.
- Tracks 8.0" to 12.125" bounds.
- Achieves 0.0005" precision gradient steps.
- Isolates bore taper and out-of-round variations.
- Employs dual automatic centering plunger components.
- Includes high-durability hardened steel tracking heads.
Starrett 749MEBZ Electronic Depth Micrometer 0-300mm integrates into quality control loops as a precision thermal calibration unit for depth metrology, offering a comprehensive 300mm range to measure holes, slots, and shoulders.
- Expert Accuracy: Digital electronic sensor precision.
- Measurement Range: 0 to 300 millimeters.
- Versatility: Measures slots shoulders projections.
- Output Unit: Dual metric and imperial.
- Storage Case: Includes protective carrying case.
Mitutoyo 611804-516 Calibrate inspection room instruments and verify factory micrometer accuracy profiles reliably with this low-expansion standalone reference standard unit.
- Provides 8.04mm exact dimension references.
- Satisfies strict Grade K ASME specifications.
- Utilizes advanced optical interferometry manufacturing processes.
- Maintains high-stability low thermal expansion profiles.
- Arrives complete with official calibration certificates.
Starrett 82MBZ Dial Bore Gage Set 5.5-15.1mm functions as a secondary standard PRT probe companion for high-resolution metric bore analysis, utilizing self-centering split-ball contacts to detect geometry issues like taper and roundness.
- Expert Accuracy: Precise 0.002mm graduation readings.
- Measurement Range: 5.5 to 15.1 millimeters.
- Geometry Detection: Identifies bell-mouth and ovality problems.
- Build Quality: Hard chrome plated polished probes.
- Measuring Depth: Up to 44mm reach capacity.
Starrett 84AZ-111-7J Optimize large internal cylinder profiling and industrial equipment validation routines with this lightweight aluminum three-point mechanical measurement platform.
- Spans 2" to 12" ranges.
- Covers 50mm to 300mm internal widths.
- Reduces pointer friction via jewel-bearing indicators.
- Features adjustable screws and centralizing plungers.
- Constructed from hardened tool steel contact materials.
Starrett 82BZ Streamline in-situ automotive valve guide tracking and aerospace cylinder audits using this high-resolution self-centering analog split-ball diagnostic tool.
- Tracks 0.217" to 0.594" internal ranges.
- Provides fine 0.0001-inch high-contrast resolution markings.
- Features self-centering mechanical split-ball probe designs.
- Integrates precise visual analog deviation indicator dials.
- Maintains high-fidelity seating during field inspections.
Imada ZTA-DPU-2200 Diagnose high-capacity dynamic tension stresses safely during destructive structural tests with this ultra-fast remote-sensor push-pull measurement package.
- Spans 0 to 2200 lbf forces.
- Captures rapid 2,000 measurements per second.
- Includes 6-foot heavy remote connection cabling.
- Stores 1,000 data metrics internally.
- Exports results directly via USB flash drives.
Imada ZTA-DPU-4400 Diagnose high-capacity dynamic mechanical stresses safely during destructive structural evaluations with this ultra-rugged push-pull force monitoring system asset.
- Spans 4400 lbf forces.
- Captures rapid 2,000 measurements per second.
- Protects sensors with 200% overload limit ratings.
- Generates USB, RS-232C, analog, and Digimatic outputs.
- Pairs with automated force-displacement diagnostic test stands.
Imada ZTS-LM-11 Load Monitoring Digital Force Gauge 11 LBF serves as a secondary standard PRT probe grade tool for low-capacity force analysis, offering programmable setpoints and exceptional 0.2% accuracy for delicate component testing and validation.
- Expert Accuracy: 0.2% full scale precision.
- Force Capacity: 11 LBF measurement range.
- Unit Selection: Lbf Kgf and Newtons.
- Sampling Rate: 2000 data per second.
- Battery Life: Rechargeable Ni-MH internal pack.