FIRST ORDER SHIPS FREE - No Minimum Purchase Required.
Tektronix TBS2104B – 100 MHz 4-Ch Wide-Screen Oscilloscopes
Tektronix TBS2104B Compare 100 MHz waveforms across 4 channels at 2 GSa/s half-rate, while the 5 Mpts buffer and 9-inch display suit education labs and general debugging.
- 100 MHz suits lab debug.
- 4 channels compare signal rails.
- 2 GSa/s half rate captures transients.
- 5 Mpts memory extends review.
- 10.1 inch display speeds classroom review.
In Stock
Description
Tektronix TBS2104B is a 100 MHz 4-channel wide-screen digital storage oscilloscope for comparing related signals during circuit characterization and academic lab work. With Tr < 3.5 ns and four analog channels, it targets repeatable timing and amplitude checks while using a 9-inch wide-screen WVGA LCD to keep multi-channel setups easy to interpret.
Use the TBS2104B’s hardware-based triggers—edge, pulse width, and video—to focus captures on the signal condition you’re investigating, then analyze the result with FFT using peak detection and a spectrum grid. Sampling is listed as 2 GSa/s (half) / 1 GSa/s (all-ch), and max memory depth is 5 Mpts, which supports longer record review than smaller memories in its basic class. For similar multi-channel workflows, see wide-screen oscilloscopes. Protocol analysis is N/A, so the scope stays aligned to waveform capture, triggering, and FFT spectral inspection.
Key Features & Benefits of Tektronix TBS2104B
- 100 MHz bandwidth with Tr < 3.5 ns supports fast multi-channel edge evaluation.
- Four analog channels enable side-by-side comparisons across related circuit nodes.
- 5 Mpts memory depth helps store waveforms for multi-channel post-review.
- Hardware triggers include edge, pulse width, and video for focused acquisitions.
- FFT with peak detection and spectrum grid supports basic frequency inspection.
Why Buy Tektronix TBS2104B
Buy the Tektronix TBS2104B when your troubleshooting needs more than two channels but you still want a wide-screen display and a straightforward measurement workflow. The specs show 100 MHz bandwidth, Tr < 3.5 ns, and four analog channels for simultaneous multi-signal checks. With 2 GSa/s (half) / 1 GSa/s (all-ch) real-time sampling and a 5 Mpts record length, it’s suitable for capturing and revisiting short events during education labs, I/O troubleshooting, and circuit characterization. Since protocol analysis is N/A, this model emphasizes waveform capture, hardware triggering, and FFT spectral tools rather than automated decoding.
Education And Warranty Support
Tektronix positions the TBS2104B for I/O troubleshooting, circuit characterization, and academic engineering labs. The metrological compliance is specified as ISO/IEC 17025 standard traceability, supporting documented calibration handling workflows. Warranty is listed as 5 Years standard warranty with 12 Months recalibration. Connectivity includes USB and Ethernet plus a TekVPI interface that supports active probes. The specs list a 9-inch wide-screen WVGA LCD and waveform update optimized for long-record visualization, which helps when you review multi-channel captures. The country of origin is shown as USA / China, so it’s omitted here.
Tektronix TBS2104B Metrology Specs
| Brand & Full Model SKU | Tektronix TBS2104B |
|---|---|
| Country of Origin | USA / China |
| Bandwidth & Rise Time | 100 MHz | Tr < 3.5 ns |
| Analog & Digital Channels | 4 Analog Channels |
| Max Real-Time Sample Rate | 2 GSa/s (Half) / 1 GSa/s (All-ch) |
| Waveform Update Rate | Optimized for long-record visualization |
| Max Memory Depth | 5 Mpts (Industry leading in basic class) |
| Vertical Resolution & High-Res Mode | 8-bit (Standard) |
| Input Sensitivity & Noise Floor | 2 mV/div to 5 V/div | High fidelity front-end |
| Timebase Range & Jitter | 2 ns/div to 100 s/div | High stability oscillator |
| Hardware-Based Triggers | Edge, Pulse Width, Video |
| Protocol Analysis & Decoding | N/A |
| Spectral Analysis | FFT with Peak Detection and Spectrum Grid |
| Display & UI Architecture | 9-inch Wide-Screen WVGA LCD |
| Connectivity & Interface | USB, Ethernet, TekVPI (Supports active probes) |
| Multi-Instrument Integration | Courseware support for education labs |
| Standard Warranty & Service Interval | 5 Years Standard Warranty | 12 Months Recalibration |
| Metrological Compliance | ISO/IEC 17025 Standard Traceable |
| Industrial Application | I/O troubleshooting, circuit characterization, and academic engineering labs. |
You must be logged in to post a review.












Reviews
There are no reviews yet.