FIRST ORDER SHIPS FREE - No Minimum Purchase Required.
Tektronix TIVP1 – 1 GHz IsoVu Isolated HV Probe
Tektronix TIVP1 Capture 1 GHz isolated differentials with 160 dB CMRR at DC and 80 dB at 1 GHz, helping GaN switching teams inspect high-side transitions without shared-ground noise.
- 1 GHz bandwidth sharpens edges.
- 160 dB CMRR blocks offsets.
- 80 dB at 1 GHz rejects interference.
- 450 ps rise reveals switching detail.
- 1 channel isolates difficult nodes.
In Stock
Description
Tektronix TIVP1 specifies a 1 GHz IsoVu isolated HV probe for high-speed isolated measurements, with Tr < 450 ps and a 1 differential isolated channel. Its CMRR is listed as 160 dB @ DC and 80 dB @ 1 GHz, supporting differential waveform integrity when common-mode interference is present. The metrology section states ISO/IEC 17025 accredited calibration and USA as the country of origin.
For switching-oriented diagnostics, use TIVP1 alongside a compatible TekVPI oscilloscope chain, since the specs state TekVPI interface integration and emphasize fast switching protocol audits. The probe’s spectral workflow is listed as flat frequency response for harmonic integrity, and the UI is specified as TekVPI integrated control. Many acquisition and update specs are described at a high level (N/A values for sample rate and memory depth), so waveform capture performance depends on the connected scope. If you’re comparing isolated-probe options, see high-speed HV probes.
Key Features & Benefits of Tektronix TIVP1
- 1 GHz bandwidth with Tr < 450 ps supports high-speed isolated differential measurement.
- CMRR is specified as 160 dB @ DC and 80 dB @ 1 GHz.
- Fiber-optic isolation architecture targets stable differential measurements in noisy environments.
- Flat frequency response supports harmonic integrity checks during characterization.
- TekVPI integrated control provides probe-side parameter management on Tek scopes.
Why Buy Tektronix TIVP1
Choose the TIVP1 when your application needs wide bandwidth isolated probing with strong common-mode rejection. The listed CMRR values at DC and 1 GHz, plus Tr < 450 ps, support differential waveform fidelity in high common-mode settings such as switching environments. The probe is explicitly framed for fast switching protocol audits, but it still functions as an isolated analog front end—so capture settings and storage are handled by your connected TekVPI instrument where sample-rate and memory parameters are not provided on the probe itself.
GaN Switching And Warranty Support
Tektronix lists TIVP1 for high-speed GaN switching loss, EMI troubleshooting, and medical high-voltage isolation. Metrological compliance is specified as ISO/IEC 17025 accredited calibration, and country of origin is USA. Warranty is listed as 1 Year standard warranty with 12 Months recalibration. Connectivity is specified as TekVPI (optical sensor to controller), and the display/control architecture is described as TekVPI integrated control. Protocol analysis is stated as compatible with fast switching protocol audits, while other acquisition parameters are not provided at probe level, so confirm TekVPI scope compatibility.
Tektronix TIVP1 Metrology Specs
| Brand & Full Model SKU | Tektronix TIVP1 (IsoVu Isolated Probe) |
|---|---|
| Country of Origin | USA |
| Bandwidth & Rise Time | 1 GHz | Tr < 450 ps |
| Analog & Digital Channels | 1 Differential Isolated Channel (Fiber Optic) |
| Max Real-Time Sample Rate | N/A |
| Waveform Update Rate | High Fidelity Optical Path |
| Max Memory Depth | N/A |
| Vertical Resolution & High-Res Mode | Interchangeable Sensor Head (Varying Ratios) |
| Input Sensitivity & Noise Floor | Superior CMRR: 160 dB @ DC; 80 dB @ 1 GHz |
| Timebase Range & Jitter | Minimal Propagation Delay Variation |
| Hardware-Based Triggers | N/A |
| Protocol Analysis & Decoding | Compatible with Fast Switching Protocol Audits |
| Spectral Analysis | Flat Frequency Response for Harmonic Integrity |
| Display & UI Architecture | TekVPI Integrated Control |
| Connectivity & Interface | TekVPI (Optical Sensor to Controller) |
| Multi-Instrument Integration | Direct scaling and unit identification on Tek scopes |
| Standard Warranty & Service Interval | 1 Year Standard Warranty | 12 Months Recalibration |
| Metrological Compliance | ISO/IEC 17025 Accredited Calibration |
| Industrial Application | High-speed GaN switching loss, EMI troubleshooting, and medical high-voltage isolation. |
You must be logged in to post a review.










Reviews
There are no reviews yet.